User & Product Manuals


MANUALS
BROCHURES

Manual Revolving Doors


500 Series

Installation Manual


1500 Series

Installation Manual


Read more...

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.
Read less

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.

2500 Series

Installation Manual


3500 Series

Installation Manual


Automatic Revolving Doors


1500A Series

Installation Manual


1500A Series

Owners Manual


Read more...

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.
Read less

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.

4900ASR Series

Installation Manual


4900ASR Series

Owners Manuals


Balanced and Speciality Swing Doors


Balanced Doors

Installation Manual


Read more...

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.
Read less

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.

Swing Doors

Installation Manual


BROCHURES


500 Series


1500 Series


Read more...

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.
Read less

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.

1500A Series


2500 Series


3500 Series


4900 ASR


Read more...

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.
Read less

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.

Balanced Doors


Swing Doors


Push and Go Power Assist


Revolving Doors. The Green Solution


Read more...

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.
Read less

When a person enters the door and applies force by pushing on the door wing it activates an AC motor that assists in the rotation of the door. Once force is removed (person stops pushing) or the door reaches the home position (X) the motor disengages, and the motor stops and the door does not rotate.

  • Automatic Quarter pointing – If the door is out of position (+) for example after 15 seconds if there is no one present in the door sensor zone the door will rotate automatically to the home position (X), Quarter-point.
  • The door is driven by a 1/3 HP AC motor and helical bevel gearbox.
  • Control of the motor is through a frequency inverter and programmable logic controller.
  • The activation is by a sliding linear target and proximity sensors that detects when there is force applied to the door wing.
  • All manual revolving doors with this feature will require a 12” high canopy and will be constructed using one piece aluminum extrusion for painted and anodized doors. Clad door will require a different construction method.
  • The soffit ceiling sheets are “pie” segments for easy access and adjustment to the motor and controls and for field assembly of the door.
  • This system can also accommodate actuators to lock the door wings if required.
  • Complies with ANSI standards for all CJ Rush Manual doors with power assist.

In Need of | Talk to us

CONTACT US
Privacy Settings
We use cookies to enhance your experience while using our website. If you are using our Services via a browser you can restrict, block or remove cookies through your web browser settings. We also use content and scripts from third parties that may use tracking technologies. You can selectively provide your consent below to allow such third party embeds. For complete information about the cookies we use, data we collect and how we process them, please check our Privacy Policy
Youtube
Consent to display content from Youtube
Vimeo
Consent to display content from Vimeo
Google Maps
Consent to display content from Google